How to Fix a PSP Screen Not Working

How to Fix a PSP Screen Not Working

psp screen not working

The screen of your PSP may have become cracked or scratched and you want to repair it. However, PSP screen repair can be expensive. It is a lot cheaper than buying a new PSP. Before you start the repair process, you need to check whether the screen of your PSP can be fixed. Below are some tips to solve your problem. Listed below are some of the most common screen repair methods.

How to fix a smudge on a PSP screen

How to fix a smudge is a widespread problem for the Sony PSP. In some cases, you may even be able to use toothpaste to clean it! The problem with toothpaste is that it can leave tiny scratches on your PSP screen, so you should only use it on an extremely clean PSP. A better solution is to use 3M Scotch Tape, which is very cheap and will also work.

You can also use compressed air to clean the UMD disks. This will also help remove dirt that might be blocking the inner workings of your PSP. Simply flip the PSP over and open the tray. Then, test the device with a UMD disk to make sure it works correctly. If the problem persists, you can try a different UMD disk.

Another possible solution is to change the PSP’s cover. This will fix the screen problem, but it will be harder to find a suitable replacement. If you do not have one, you can use compressed air to clean the memory card slot. Once it is clean, you can insert your PSP back into the case and try again. You must follow the manufacturer’s instructions to ensure the new PSP will work properly.

If your PSP is charging, but the battery doesn’t work, you may have a dead battery. If this happens, you need to charge it with an AC adapter. The AC adapter should turn orange, which means it is charging. If you cannot charge the unit with this battery, you should take it in to get it serviced. Then, you can try a new battery.

Another common problem with PSPs is a faulty Memory Stick card. If you cannot replace the memory card, the problem lies elsewhere. First, replace the Memory Stick. If this still does not work, you should contact Sony for repair. You can buy a new one from the company online. Once you have it back, you can play your PSP! This method is effective for a wide variety of problems.

How to format a memory stick on a PSP

If you’re having trouble with the PSP screen not working, you’ve probably heard that you need to format the memory stick. But how do you do this? Here’s what you need to do. First, turn your PSP on as normal, and then navigate to the XMB menu. Scroll up until you find the option to Format Memory Stick, and click it. Once you do, your PSP will ask you to confirm the format, leaving you with a clean Memory Stick.

Secondly, you should check the ports on your PSP. The power jack, USB port, and headphone jack are the most likely culprits. Make sure that all of them are clean before you proceed. If the memory stick is plugged in, you can blow out the dust by blowing it out with a compressed air can. Once you’ve cleaned the ports, you can move on to the next step.

Next, disconnect your PSP’s USB connection. The USB cable is plugged in. Now, use the Finder window to remove the Memory Stick. After the device is disconnected, hit the “O” button on the PSP. To disconnect the PSP from your computer, pull out the USB cord and then remove the Memory Stick. After that, you’ll have a clean Memory Stick.

Third, test the device. A faulty UMD disk could be blocking the inner workings of the PSP. Please ensure the UMD disk is clean and free of dirt, and turn it the other way. Once you’ve done this, test your PSP’s screen with a UMD disk. The PSP should now work. If the problem persists, try to replace the UMD disk with another one.

The main circuit board assembly is the hardest part of the process. You’ll need to have the patience to remove the PSP’s LCD. You should carefully bend out the top of the PSP case. Using the flat head screwdriver, lift the brown catch. The circuit strip should now slide out. The LCD screen should currently be working. If you’ve done all this, your PSP is ready for a new memory stick.

If the PSP still won’t work, it’s probably time to update the system software. You can also download the latest system software version from the internet. During the process, you’ll get an error message. Don’t worry; it’s just a temporary problem. When this happens, it’s time to get your PSP back online. The update should be installed in about five minutes.

The circuit board for the memory stick is tricky to insert. To make sure you insert it correctly, the PSP contains guide pins. Follow the instructions in Figures 1-32 and 1-33. Remember to wrap the wireless antenna around the side of the memory stick before inserting it. Once the memory stick is inserted correctly, the PSP screen should start working. If it isn’t, you’ll need to remove the network cardboard and the black plastic support.

Troubleshooting a dead PSP

If you have a dead PSP screen, you may wonder what caused it. You may have recently purchased a used device, or perhaps your PSP has suffered from a previous repair. Either way, you should know what to look for to repair the problem yourself. This will prevent the problem from recurring and costing you more money. Continue reading to learn more about what to look for when troubleshooting a dead PSP screen.

First, check the UMD disc. If it’s fragged, this means it’s corrupted. If you’ve recently had a recent temperature change, there’s good chance moisture has condensed on the UMD. To fix this, wipe the UMD with a dry cloth and wait several hours. If the problem persists, consider replacing the UMD. Fortunately, this procedure is relatively inexpensive.

If you’re having trouble with the background color on your PSP, you can manually change the color by using the system’s settings menu. The screen brightness button is marked with a small donut-like icon. Press it to increase the brightness. Holding it down will turn off the backlight. If this doesn’t work, try changing the date on the PSP’s main menu to a different month.

Another way to solve this problem is to downgrade the firmware on your PSP. It’s possible to downgrade from Version 2.0 to Version 1.5 firmware. While doing this may be risky, the downgrade can give you access to a new world of homebrew. This can be a viable solution for some PSP users. The downside is that you’ll have to install new firmware. It’s important to back up your PSP firmware before doing this because the updated firmware can corrupt your system.

If you cannot solve the problem yourself, you can take it to a repair shop. A good repair shop should be able to solve the problem for a reasonable fee, such as $30 or $50. The repair should cover the price of parts, plus VAT and labor. If you cannot replace your PSP, check to see if the game disc is dusty or scratched. If so, you may want to remove the dust from the game disc and insert it into the PSP.

Once you’ve disconnected all components, you can begin the reassembling process. Be careful, though, because you will deal with many tiny pieces. First, disconnect the black power wire from the main circuit strip. Next, unplug the suitable controller connector and pull out the circuit board. Finally, you may need to remove the black plastic supporter. The connector will be visible if you can’t remove the black plastic supporter.